Conformational epitope
Highly published

anti-AAV8 (intact particle) mouse monoclonal, ADK8, Biotin Conjugate





Cat. No: 615160

Available, delivery time 1-7 days


Key Features
  • Biotin conjugate
  • Mouse monoclonal
  • Suitable for  ELISA
  • Reacts with AAV1, AAV3, AAV7, AAV8, AAVrh10, AAVrh74 and Anc80 intact particles
  • Isotype: IgG2a kappa
Product description
Quantity 750 µl
Antibody Type Monoclonal
Host Mouse
Isotype IgG2a kappa
Conjugate Biotin
Application ELISA
Purification Affinity chromatography
Reactivity AAV1, AAV3, AAV7, AAV8, AAVrh10, AAVrh74, Anc80
Storage before reconstitution 2-8°C until indicated expiry date
Storage after reconstitution 2-8°C
Intended use Research use only
Clone ADK8
Immunogen AAV8 capsids
Formulation Lyophilized; after reconstitution with 750 µl sterile PBS
Synonym Adeno-associated virus 8, AAV-8
Tested applications Tested dilutions
ELISA 1:20

For characterization of different stages of infection and very useful for the analysis of the AAV assembly process. ADK8 specifically reacts with AAV1, AAV3, AAV7, AAV8, AAVrh10, AAVrh74 and Anc80, empty and full capsids. Recognizes a conformational epitope of assembled capsids. Predicted binding site: residues 586-LQQQNT-591 (Gurda et al. 2012).
Gurda, B. L. et al. Mapping a Neutralizing Epitope onto the Capsid of Adeno-Associated Virus Serotype 8. J. Virol. 86, 7739–7751 (2012).

Limited Use Label License: Research Use Only
Product is exclusively licensed to PROGEN Biotechnik GmbH. The use of these products for the development, manufacturing and sale of secondary products/derivatives which are based on the purchased products and/or which include the purchased product require a royalty based sub-license agreement.

Q & A's

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Customer Reviews

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

The concentration of unpurified supernatant, ascites, unpurified guinea pig serum and unpurified rabbit serum is not determined.
The concentration of purified antibodies is mentioned on the datasheet.
For prediluted antibodies the concentration may vary from lot to lot. The concentration of these antibodies is not mentioned on the datasheet and can be requested at

Most of our purified mouse antibodies contain 0.5% BSA as stabilizer. If BSA was added to the antibody solution, it is stated in the datasheet.
The supernatant format contains FCS proteins from cell culture medium supplemented with FCS.
The serum antibodies contain other proteins present in serum.

Please find the solvent for reconstitution and the amount of liquid for reconstitution on the antibody datasheet. The buffer formulation after reconstitution is also mentioned in the datasheet.
PROGEN offers different formats for mouse monoclonal antibodies.  Different antibodies may not be offered in each format, the following are all possible formats:
  1. Supernatant and supernatant concentrate: This format contains hybridoma cell culture supernatant. The antibody is not purified and the antibody concentration is not determined. The antibody concentration may vary from lot to lot. Therefore we recommend to titrate the optimal concentration for the application used for each new lot.
  2. Lyophilized, purified: This format contains purified antibody in lyophilized form. The reconstitution of this antibody is described in the datasheet. The buffer composition after reconstitution is also mentioned on the datasheet. 
  3. Liquid, purified: This format contains purified antibody in liquid format. The concentration is mentioned on the datasheet. 
  4. Prediluted, purified: This format contains purified antibody in liquid format. Most antibodies in this format are diluted to be ready-to-use for IHC with standard tissue. But some antibodies of this format need further dilution for IHC. This is mentioned on the datasheet.

Lyophilized antibodies can be stored at 2-8°C until expiration.
Most of our liquid antibodies and reconstituted lyophilized antibodies may be stored for short term storage (up to 3 month) at 2-8°C. For long term storage we recommend to store the antibody at -20°C in aliquots. Please avoid freeze and thaw cycles.
Most of our conjugated antibodies should be stored at 2-8°C.
The individual storage conditions are mentioned on the datasheet.

The expiration date of our antibodies is indicated on the product label.
We offer bulk amounts starting from 1 mg for many of our mouse monoclonal or recombinant antibodies. Please contact us for further information or use the “bulk button” on the product page?
Most of our antibodies contain 0.09% sodium azide as preservative. If a preservative is added, it is mentioned in the datasheet.
The optimal antibody dilution for your specific protocol and application needs to be titrated in your lab with your equipment and sample. The optimal dilution may vary between protocols and samples. A good dilution for starting the titration is the dilution mentioned in the datasheet. If the sample needs a specific treatment (eg. Antigen retrieval for IHC on FFPE sections) this should also be mentioned on the antibody datasheet. 

Anti-Adeno-Associated Virus Capsid Proteins Antibodies

For more information on the antibody binding epitopes of the capsid protein antibodies A1, B1 and A69 see the table below summarizing the published data from the following publication on the specific antibody binding sites:

Table Binding Sites of the AAV capsid protein antibodies

Wobus, C. E. et al. Monoclonal antibodies against the adeno-associated virus type 2 (AAV-2) capsid: epitope mapping and identification of capsid domains involved in AAV-2-cell interaction and neutralization of AAV-2 infection. J. Virol. 74, 9281–93 (2000).

Anti-Adeno-Associated Virus Particle Antibodies

For more information on the antibody binding epitopes on assembled AAV1, 2, 5, 8 and 9 capsids, see the tables below summarizing the published data from the following publications on the specific antibody binding sites:

summary binding epitopes

PROGEN antibodies are shipped at ambient temperature. The antibodies are stable at ambient temperature for the shipment period. Please store the antibodies as indicated in the datasheet upon arrival.
AAV8 ELISA Control
Cat. No: PRAAV8-C
  • Consists of fully assembled, empty AAV8 capsids
  • Represents serotype-specific conformational epitopes
  • Reliable positive control for ELISA

OptiPrep™ (Iodixanol)
Cat. No: 1114542
  • Ready-made, sterile and endotoxin-tested solution of iodixanol
  • Suitable for the isolation of many different cell types from blood and tissue as well as for the isolation of cell organelles and membrane fractions
  • Separation of viable from non-viable cells
  • Also suitable for self-generated gradients
  • Highly effective for purification of viruses and virus particles
  • Also suitable for isolation of proteins, plasma lipoproteins and plasmid DNA, fractionation of ribonucleoproteins

anti-AAV8/9 (intact particle) mouse monoclonal, ADK8/9, supernatant
Cat. No: 651161
Quantity: 5 ml
  • Hybridoma cell culture supernatant
  • Mouse monoclonal
  • Suitable for dot blot and ICC/IF
  • Reacts with AAV8, AAV9, AAVrh10, AAVDJ, Anc80 and AAVrh74 intact particles
  • Isotype: IgG2a kappa

Variants from $133.00*
AAV8 Titration ELISA
Cat. No: PRAAV8
  • ELISA for quantitation of AAV8 capsids
  • Detection of full and empty AA8 capsids
  • ADK8 antibody is used as capture and detection antibody

AAVrh10 Titration ELISA
Cat. No: PRAAV10
  • ELISA for quantitation of AAVrh10 capsids
  • Detection of full and empty AAVrh10 capsids
  • ADK8 antibody is used as capture and detection antibody

Fast, easy and reliable AAV8 titer determination:
  • get results in less than 2 hours and increase your daily sample throughput
  • easy workflow & process integration
  • same accuracy and reproducibility as the standard AAV8 Titration ELISA
  • ADK8 antibody is used as capture and detection antibody